Autocheck Gas & Smoke Analyzer combination integrates Gaseous (CO, CO2, HC, O2, Nox, Lambda, or AFR) analyzer of Gasoline or LPG cars and Smoke Opacity Analyzer of Diesel Vehicle as one unit. And we actuated Diesel Engine RPM/Temperature mete of RPM/Oil Temperature meter for Gasoline Engine and switchable one adaptor box and one serial plug. Gaseous Analyzer exceeds the performance requireents of ASM/BAR97 and OIML Class 1&0, while design criteria of Smoke Opacity conform to French NF R 10-025, the German PTB EO 18-09, ISO 11614 draft and ECE R24, Annex 8/9 specifications.
Features Gas & Smoke
- Heavy duty and high accuracyanalyzer.
- Read continuous measurements either in service garage or in vehicle under load.
- Complete stand alone unit, no additional equipment required for operation.
- Large LCD display with backlight and touch-keypad operation.
- Automatic zero calibration and semi automatic span calibration.
- Rugged deluxe ABS case.
- Clip jack for Power DC 12V
- Self diagnostic.
- Data management (save, edit, delete).
- Maximum accuracy, high performance and operational stability promoted by microprocessor control and automatic programs.
- Communication with personal computer interface RS-232.
- Built in thermal printer.
- Choice of language English or Indonesia (Requirement)
- Result test numbers and graphic of print data opacimeter
2 in 1 (Combine)
Two for One! (All in one) Autochek Gas & Smoke Analyzer integrates gaseous analyzer (CO, HC, CO2, O2, Nox, Lambda, and AFR), gasoline, LPG cars and Diesel vehicle Smoke analyzer as one unit. It exceeds the performance requirements of BAR97 and OIML 1&0, Desing Criteria Conforms to French NF-R 10-025 standard. It also meets with the requirements of any regulations referring, from the point of view of the measurement, to European guidelines. A single adapter measures both Gasoline Engine RPM/OIL Temperature and Diesel Engine RPM/OIL Temperature.
Note Request: You can choice menu language Indonesia or English
GAS 4/5 Basic Accessories: Probe Gas, Thermal printer, Paper printer, Filter-filter, Manual, AC Cable Power, DC Power Cable
SMOKE Basic Accessories: Probe Smoke, Thermal printer, Paper printer, Smoke sensor, Manual, AC Cable Power, DC Power Cable
- Engine temperature & RPM check kit (option).
- PC software (option)
- Trolley (optional)
|1||Measurement||CO, CO2, HC, O2, NOx (option)||Opacity N% / Koefisient|
HC: 0-10000ppm vol
NO: 0-5000ppm vol
Lamda: 0.5 - 3.0
AFR: 5.00 - 25.00
N: 0 - 100%
|4||Response time||less than 10 sec||1 sec|
|5||Output Interface||Yes RS-232 (19.200bps)||Yes RS-232 (9.600bps)|
|6||Warm-Up Time||less than 60 seconds||less than 5 minutes|
|7||Power Supply||AC 110-220V or 12VDC||AC 110-220V or 12VDC|
|8||Dimension||270 (W) x 245 (H) x 419 (D)mm Controller||370 (W) x 200 (H) x 160 (D)mm Bench|